A storefront window display brief: size, orientation, glass transmission, anti-glare coating, mounting and cooling, plus supplier questions.
What a window-facing display is
A window-facing display sits inside the store, behind the full-height glass, and faces out to the street. It is neither a pure indoor screen nor an outdoor totem. The screen works through a glass panel that reflects ambient light, blocks some output, and traps heat between itself and the glass. Specifying it well means answering the site conditions before choosing a model.
Read the storefront before you pick the screen
Start with what the screen will actually face:
- Which direction the window faces, and when direct sun hits it
- Pedestrian viewing distance and the side angle people stand at
- Whether the glass is single or double, tinted or reflective
- How much space there is behind the glass for the screen, brackets and cabling
- Whether the display runs daytime only, or through evening opening hours
These inputs decide size, brightness and cooling more than the product brochure does.
Size, resolution and viewing angle
The covered window-display range runs 32" to 65". Pick size from the viewing distance and window width, not from the largest option that fits the frame. For storefront graphics and branding content, the covered models use FHD 1920×1080 resolution; the panel carries a 178° horizontal and 178° vertical viewing angle, which matters because pedestrians usually see the screen from an oblique angle rather than straight on.
Check the bezel width and how the screen sits in the frame. A narrow bezel keeps the display looking built-in; confirm the actual dimensions and mounting clearances before ordering shop-fit work.
Brightness by window orientation
Behind glass, brightness has to beat reflection, not open-sun glare. The existing window-brightness guide breaks this down by orientation:
- North-facing window with no direct sun: 1500–2000 nits class
- East or West window with morning or afternoon sun: 2000–2500 nits class
- South-facing window in full sun: 2500 nits, with 3000 nits as the upper grade
Higher output behind glass is not automatically better. It adds heat to the enclosed cavity, and a glossy over-bright screen can read as a mirror reflecting the street.
Glass and anti-glare matter as much as nits
The storefront glass blocks some of the screen output, typically around 10–15%, and reflects light back at the viewer. Ask specifically about the front surface of the display:
- Haze value of the anti-glare coating; 2–5% haze suits window-facing use
- Whether the surface is anti-reflective coated
- How the image holds up at a 45° side angle, which is how pedestrians actually view it
The covered window models use an IPS industrial LCD with a 1200:1 contrast ratio and a 3% haze anti-glare surface. Pair that with the glass condition at the site before fixing the brightness grade.
Mounting, orientation and heat in the cavity
Window displays can run landscape or portrait. Confirm the mounting method, wall or bracket capacity, cable routing and access for servicing before installation.
Heat is the main hidden risk behind glass. The covered models run with a quiet fan below 40 dB and a rated operating temperature of 0–45°C. The enclosed space between screen and glass needs enough ventilation gap; sealing the cavity against heat traps the very warmth the screen is trying to reject.
What to prepare for a quotation
Send the supplier:
- Window orientation and any known direct-sun hours
- Viewing distance and pedestrian sightline
- Glass type, tint and whether it is reflective
- Target screen size, portrait or landscape
- Estimated quantity and destination market
- Any mechanical, interface or playback requirements
The covered window family lists an MOQ of 5 pieces, a 4–5 week lead time and a one-year warranty; confirm the final terms in the quotation for your configuration.
Who this guide is for
Retail operators, store designers, display distributors, system integrators and signage contractors planning window-facing screens for shops, showrooms, boutiques or chain retail locations.
FAQ
How bright does a window display need to be?
It depends on orientation. Shaded north windows sit in the 1500–2000 nits class, east and west windows in 2000–2500 nits, and full-south sun around 2500 nits with 3000 nits as the upper grade. Glass and reflection determine whether that output reads clearly.
Does the storefront glass reduce the screen brightness?
Yes, typically by around 10–15%, and the glass also reflects ambient light. Factor both into the brightness choice and check the display's anti-glare surface rather than relying on nits alone.
Can a window display be mounted in portrait?
Yes, the covered window models support landscape and portrait. Confirm orientation, bracket capacity, cable routing and service access with the supplier before installation.
How hot does a screen behind glass get?
The cavity traps heat, so ventilation gap and cooling matter. The covered models use a quiet fan below 40 dB and are rated 0–45°C operating temperature; keep an open cooling path between the screen and the glass.
What sizes are available for storefronts?
The window-display range covers 32" to 65". Select size from viewing distance and window width, and confirm resolution and bezel dimensions against the shop-fit layout.
Related reading
Send the project inputs
Share photos of the storefront, window orientation, viewing distance and target size. The sales team can confirm the suitable window display model, orientation and finish.

